Housing Assembly HVAC: Service and Repair

Heater Core And Evaporator Core Housing

Removal

WARNING:
^ Persons working on the supplemental restraint system (SRS) must be fully trained and have been issued with the safety guidelines.
^ Allow a period of 10 minutes to elapse after disconnecting the battery before undertaking any work on the SRS.
^ The SRS electrical connectors are unique.DO NOT force, or attempt to connect electrical connectors to the wrong sockets.
^ The correct procedures must always be used when working on SRS components.
^ It is imperative that before any work is undertaken on the SRS system, the appropriate information is read thoroughly.
^ Always disconnect both battery cables before beginning work on the SRS system.Disconnect the ground cable first.Never reverse connect the battery.
^ Take extra care when handling SRS components.

1. Remove the in-vehicle crossbeam.
2. With assistance, remove the heater and evaporator core housing.

Installation
1. With assistance, install the heater and evaporator core housing.
2. Install the in-vehicle crossbeam.