Headlamp: Service and Repair

Headlamp Assembly

Service Repair No - 86.40.49

Removal

WARNING: Vehicles fitted with Xenon headlamps, the following precautions must be observed. Failure to comply may result in exposure to ultra violet rays, severe electric shock, burns or the risk of explosion. Ensure the headlamps are switched off at all times. Eye and hand protection must be worn. Never switch on the lamps or test the bulbs with the lamp holder released from the headlamp.

1. Disconnect the battery ground cable.
2. Remove the radiator grille.
3. Remove the headlamp assembly.
^ Remove the 3 screws.
^ Disconnect the electrical connector.





Installation
1. Install the headlamp assembly.
^ Connect the electrical connector.
^ Tighten the screws.
2. Install the radiator grille.
3. Connect the battery ground cable.
4. Check the headlamp alignment and adjust if necessary.