Engine - Revised Engine Removal/Installation Procedure

No.: LTB00131

Issue: 1

Date: 04 APR 2008

SECTION: 303

Revised Workshop Procedure - Engine Removal / Installation





AFFECTED VEHICLE RANGE

CONDITION SUMMARY:

Situation:

As a direct result of Retailer input, Service Repair Operation times have been increased and the Workshop Manual procedure for the removal/installation of both the Normally Aspirated and Supercharged engine assemblies has been revised. The procedure has changed by removing the transmission and lowering the engine through the bottom of the vehicle.

Action:

When removing / installing the engine assembly, follow the Repair Procedure outlined below.

PARTS:

No parts necessary





WARRANTY:

NOTE:
Repair procedures are under constant review, and therefore times are subject to change; those quoted here must be taken as guidance only. Always refer to DDW to obtain the latest repair time.

DDW requires the use of causal part numbers. Labor only claims must show the causal part number with a quantity of zero.

REPAIR PROCEDURE

REMOVE /INSTALL ENGINE ASSEMBLY

NOTE:
Global Technical Reference (GTR) lookup sequence is as follows: GTR Home > NAS > LM - New Range Rover > Service Information > Model Year > Workshop Manuals > 3: Powertrain > 303: Engine

1. Refer to Workshop Manual (GTR) Section 303 - 01A: Engine - 4.2L or Section 303 - 01B: Engine - 4.4L for the revised removal / installation procedure.