Trunk / Liftgate Striker: Adjustments

Liftgate Striker Adjustment

Service Repair No - 76.37.28

1. Check for an equal gap and alignment to the adjacent panels. If incorrect, follow the adjust procedure below.







2. Remove the liftgate striker trim panel.







3. Loosen the 2 liftgate striker bolts.
4. Close the liftgate and check for an equal gap and alignment to the adjacent panels.
5. Open the liftgate and tighten the liftgate striker bolts to 25 Nm (18 lb.ft).
6. Install the liftgate striker trim panel.