Hydraulic Timing Chain Tensioner RH

Hydraulic Timing Chain Tensioner RH

Service Repair No - 12.65.66

Removal
1. Disconnect the battery ground cable.
2. Remove the engine cover.





3. CAUTION: Before the disconnection or removal of any components, ensure the area around joint faces and connections are clean. Plug any open connections to prevent contamination.

Remove the RH hydraulic timing chain tensioner.

Installation
1. Install the RH hydraulic timing chain tensioner.
^ Clean the component mating faces.
^ Tighten the tensioner to 45 Nm (33 ft. lbs.).
2. Install the engine cover.
3. Connect the battery ground cable.