Rear Center Safety Belt Buckle - Vehicles With: 60/40 Split Seat

Rear Center Safety Belt Buckle - Vehicles With: 60/40 Split Seat

Service Repair No - 76.73.64

Removal
1. Release the RH rear seat.
^ Fold the seat cushion forward.
^ Remove and discard the 4 Torx bolts.
^ Fold down the rear seat backrest.





2. Remove the RH rear seat.
3. Remove the rear seat cushion side finisher.
^ Raise the seat cushion.
^ Remove the screw.





4. Remove the safety belt buckle.
^ Release the retaining strap.
^ Remove and discard the bolt.





Installation
1. Install the safety belt buckle.
^ Tighten the Torx bolt to 40 Nm (30 ft. lbs.).
^ Attach the retaining strap.
^ Lower the seat cushion.

2. Install the rear seat cushion side finisher.
^ Tighten the screw.

3. Install the RH rear seat.
^ Position the seat on the dowels.

4. Secure the RH rear seat.
^ Return the seat backrest to the upright position.
^ Tighten the new bolts to 40 Nm (30 ft. lbs.).
^ Fold the seat cushion rearwards.