Supercharger: Service and Repair

Supercharger

Service Repair No - 19.46.15

Removal
1. Disconnect the battery ground cable.
2. Remove the coolant manifold.
3. Remove the throttle body elbow.
4. Position the throttle body intake spigot and wiring harness aside.
^ Remove the bolt.

5. Remove the supercharger.
^ Remove the 3 bolts.





Installation
1. Install the supercharger.
^ Clean the component mating faces.
^ Clean the locating dowels.
^ Tighten the bolts to 25 Nm (18 ft. lbs.).

2. Install the throttle body intake spigot.
^ Tighten the bolt to 25 Nm (18 ft. lbs.).

3. Install the throttle body elbow.
4. Install the coolant manifold.
5. Connect the battery ground cable.