Interior Moulding / Trim: Specifications

Torque Specifications

Ignition Switch to In-Vehicle Crossbeam Bracket Screws 2 Nm (2 ft. lbs.)
Instrument Panel Upper Section Large Headed Screws 3 Nm (2 ft. lbs.)
Passive Anti-Theft System (PATS) Module to Heater and Evaporator Core Housing Bracket Screws 1 Nm (1 ft. lbs.)
Wiring Harness to In-Vehicle Crossbeam Plastic Self Tapping Nut 2 Nm (2 ft. lbs.)
Steering Column Lower Shroud Center Screw 2 Nm (2 ft. lbs.)
Portable Camara Docking Station to Lower Glove Compartment Screws 3 Nm (2 ft. lbs.)
Upper and Lower Glove Compartment Latch to Liner Screws 2 Nm (2 ft. lbs.)
Driver Lower Air Bag Trim Panel to Instrument Panel Screws 3 Nm (2 ft. lbs.)
Veneer Trim Panel to Floor Console Extension Trim Panel Screws 2 Nm (2 ft. lbs.)
Steering Column Lower Shroud Outer Screws 6 Nm (4 ft. lbs.)
Column Switchgear and Clockspring Housing to Steering Column Screws 6 Nm (4 ft. lbs.)
Upper Glove Compartment to Instrument Panel Reinforcement Screws 2 Nm (2 ft. lbs.)
Heater and Evaporator Core Housing to In-Vehicle Crossbeam Nuts 7 Nm (5 ft. lbs.)
C-Pillar Lower Trim Panel Screw 8 Nm (6 ft. lbs.)
C-Pillar Upper Trim Panel Screw 6 Nm (4 ft. lbs.)
*A-Pillar Trim Panel Bolt 3 Nm (2 ft. lbs.)
Footrest Trim Panel Screw 3 Nm (2 ft. lbs.)
Rear Seat Bolts 40 Nm (30 ft. lbs.)
Loadspace Luggage Tie-Down Bolt 25 Nm (18 ft. lbs.)

*Indicates a new bolt, nut or screw must be installed.