Housing Assembly HVAC: Service and Repair

Heater Core and Evaporator Core Housing

Removal

WARNING:
- Persons working on the supplemental restraint system (SRS) must be fully trained and have been issued with the safety guidelines.
- Allow a period of 10 minutes to elapse after disconnecting the battery before undertaking any work on the SRS.
- The SRS electrical connectors are unique. DO NOT force, or attempt to connect electrical connectors to the wrong sockets.
- The correct procedures must always be used when working on SRS components.
- The correct procedures must always be used when working on SRS components.
- Always disconnect both battery cables before beginning work on the SRS system. Disconnect the ground cable first. Never reverse connect the battery.
- Take extra care when handling SRS components.

1. Remove the in-vehicle crossbeam.
2. With assistance, remove the heater and evaporator core housing.

Installation
1. With assistance, install the heater and evaporator core housing.
2. Install the in-vehicle crossbeam.