Tilt Wheel Switch: Service and Repair

Steering Column Control Switch

Removal
1 Release the steering column extension gaiter.
- Release the 6 clips.




2
NOTE:
The steering wheel is shown removed for clarity.
Remove the steering column lower shroud.
- Remove the 3 screws.
3 Remove the steering column upper shroud.




4 Remove the steering column control switch.
1) Carefully release the clip.
2) Release the steering column control switch.
3) Disconnect the electrical connector.

Installation
1 Install the steering column control switch.
- Connect the electrical connector.
2 Install the steering column upper shroud.
3 Install the steering column lower shroud.
- Install the 3 screws.
4 Attach the steering column extension gaiter.