Parking Assist Control Module: Service and Repair

Parking Aid Module

Removal
1 Disconnect the battery ground cable. For additional information, refer to Specifications Service and Repair
2 Remove the LH rear quarter trim panel. For additional information, refer to Rear Quarter Trim Panel Rear Quarter Trim Panel




3 Remove the parking aid module.
- Remove the 2 screws.
- Disconnect the 3 electrical connectors.

Installation
1 Install the parking aid module.
- Connect and secure the electrical connectors.
- Tighten the screws.
2 Install the rear quarter trim panel. For additional information, refer to Rear Quarter Trim Panel Rear Quarter Trim Panel
3 Connect the battery ground cable. For additional information, refer to Specifications Service and Repair