Steering Geometry (Wheel Alignment)

Alignment Specifications

Front
Castor 4°01' ± 45' (4.02° ± 0.75°)
Cross Castor 0° ± 45' Max. (0° ± 0.75° Max.)
Camber -30' ± 45' (-0.50° ± 0.75°)
Cross Camber 0° ± 45' Max. (0° ± 0.75° Max.)
King Pin Inclination (KPI) 13°54' (13.90°)
Total Toe (Exc TdV8) -0°10' ± 12' (-0.16° - 0.20°)
Total Toe (TdV8) -0°05' ± 12' (-0.08° - 0.20°)

Rear (Dynamic Air Suspension)
Camber -1° ± 45' (-1° ± 0°75°)
Cross Camber 0° ± 51' Max. (0° ± 0.85° Max.)
Total Toe (Exc TdV8) -0°14' ± 8' (-0.24° ± 0.14°)
Total Toe (TdV8) -0°24' ± 8' (-0.40° ± 0.14°)
Thrust Angle 0° 8' Max. (0.14° Max.)

CAUTION: When checking or adjusting front or rear steering geometry, the vehicle must either have a full fuel tank or have sufficient weight placed in the vehicle's load space to give the equivalent weight of a full fuel tank. The weight must be evenly distributed at the front and the right hand side of the load space. The fuel tank capacity is 86.3 liters (18.9 Imperial gallons) (22.7 US gallons). Depending on the amount of fuel in the tank, calculate the amount of weight which must be added:

^ 1 liter of fuel weighs 0.8 kg (1.7 pounds)
^ 1 Imperial gallon of fuel weighs 3.6 kg (8.0 pounds)
^ 1 US gallon of fuel weighs 3.0 kg (6.7 pounds)

Front Suspension

Gap between underside of the toe link rubber boot and the chassis bracket:
Gap 12.0 mm (0.473 in.)

Height/distance between center of halfshaft and edge of the fender trim:
Specifications 462 mm (18.19 in.)

Rear Suspension

Gap between underside of the toe link rubber boot and the integrated body frame bracket:
Gap 15.0 mm (0.591 in.)

Height between center of halfshaft end and edge of the fender trim:
Specifications 463 mm (18.19 in.)