Radio, Stereo, and Compact Disc: Service and Repair

Audio Unit
This is a "Trustmark Authoring Standards (TAS) Repair Procedure"
- TAS style procedures can be identified by steps that have no accompanying step text and the magenta color of the electrical connectors and fasteners such as nuts, bolts, clamps or clips.
- TAS removal and installation procedures use a sequence of color illustrations to indicate the order to be followed when removing/disassembling or installing/assembling a component.
- Many of the TAS procedures will have the installation information within the removal steps.
- The TAS color illustrations use a variety of symbols to indicate important details of the procedures. It is important to understand these symbols in order to properly used the TAS procedures.
Refer to How to Use TAS Procedures and TAS Symbol Glossary at Vehicle | Description and Operation for additional information on these TAS procedures.
For additional information, refer to How to Use TAS Procedures How to Use TAS Procedures

Removal

NOTE:
Removal steps in this procedure may contain installation details.

NOTE:
Remove the media from the unit and make sure that the customer preset details are noted for installation, as the data will be lost during removal.
1 Disconnect the battery ground cable.
For additional information, refer to Specifications
For additional information, refer to Floor Console Upper Section Floor Console Upper Section





Torque to: 6 Nm

Installation

NOTE:
If a new component is to be installed, configure using Land Rover approved diagnostic equipment.
1 To install, reverse the removal procedure.