Heating and Ventilation: Overview

Heating and Ventilation

OVERVIEW
Two levels of heating and ventilation are available. Standard specification vehicles are fitted with a dual zone automatic system, which can provide different temperature settings for the LH (left-hand) and RH (right-hand) sides of the cabin. The dual zone system may also be fitted with a pollution sensor to control the quality of air in the cabin. The higher specification also offers a cool face option for rear passengers through the rear face vents fitted in the centre console.
The heater assembly for both systems is installed on the vehicle center line, between the instrument panel and the engine bulkhead as part of the cockpit assembly.
The ATC module controls operation of the blower motor via the blower motor control module, which is mounted on the bulkhead side of the heater assembly casing. For additional information, refer to Air Distribution and Filtering Air Distribution and Filtering
For additional information, refer to Air Conditioning Air Conditioning
For additional information, refer to Control Components Control Components
For additional information, refer to Electric Booster Heater Electric Booster Heater
For additional information, refer to Fuel Fired Booster Heater