Procedures

Transfer Case Fluid Level Check

CAUTION: The fluid filler plug is not a fluid level plug.

NOTE:
Some variation in the illustrations may occur, but the essential information is always correct.

WARNING: Make sure to support the vehicle with axle stands.
1 Raise and support the vehicle.
For additional information, refer to Engine Undershield Engine Undershield





CAUTION: Make sure that the area around the component is clean and free of foreign material.

NOTE:
Remove and discard the sealing washer.

CAUTION: The fluid filler plug is not a fluid level plug.
2 Fill the transfer case with the recommended fluid.
For additional information, refer to Specifications





NOTE:
Install a new sealing washer.

Torque to: 35 Nm
For additional information, refer to Engine Undershield Engine Undershield