Front Parking Aid Camera Wiring Harness - Main Body Section

Front Parking Aid Camera Wiring Harness - Main Body Section

Removal

CAUTION: Make sure that the camera overlay wiring harness is not bent excessively during this procedure. Failure to follow this instruction may result in damage to the harness.
1 Remove the LH front seat. For additional information, refer to Front Seat Front Seat
2 Remove the central junction box (CJB). For additional information, refer to Central Junction Box (CJB) Central Junction Box (CJB)
3 Remove the LH scuff plate trim panel. For additional information, refer to Scuff Plate Trim Panel Service and Repair




4 Release the wiring harness cover.
- Release the 3 clips.




5
NOTE:
The left hand front camera wiring harness connectors are colored magenta, the right hand front camera wiring harness connectors are colored blue.
Disconnect the electrical connector.




6
NOTE:
The left hand front camera wiring harness connectors are colored white, the right hand front camera wiring harness connectors are colored black.
Disconnect the electrical connector.

Installation





1
CAUTION: Make sure that the camera overlay wiring harness is not bent excessively during this procedure. Failure to follow this instruction may result in damage to the harness.
Install the camera overlay wiring harness




2
NOTE:
The left hand front camera wiring harness connectors are colored magenta, the right hand front camera wiring harness connectors are colored blue.
Connect the electrical connector.
3
CAUTION: Make sure that excessive force is not used when installing the tie straps to the wiring harness. Failure to follow this instruction may result in damage to the harness.
Feed the camera overlay wiring harness along the main wiring harness to the camera module.
- Using suitable tie straps, secure the camera overlay wiring harness to the main body wiring harness.




4
NOTE:
The left hand front camera wiring harness connectors are colored white, the right hand front camera wiring harness connectors are colored black.
Connect the electrical connector.




5 Install the wiring harness cover.
- Secure the 3 clips.
6 Install the LH scuff plate trim panel. For additional information, refer to Scuff Plate Trim Panel Service and Repair
7 Install the CJB. For additional information, refer to Central Junction Box (CJB) Central Junction Box (CJB)
8 Install the LH front seat. For additional information, refer to Front Seat Front Seat