Front Subframe Front Bushing

Trustmark Authoring Standards (TAS) Repair Procedures

NOTE: TAS style procedures can be identified by steps that have no accompanying step text and the magenta color of the electrical connectors and fasteners such as nuts, bolts, clamps or clips.

A TAS removal and installation procedure uses a sequence of color illustrations to indicate the order to be followed when removing/disassembling or installing/assembling a component.

TAS Graphics

Colors used in the graphic are as follows:
- Blue - Component to be removed/installed or disassembled/assembled.
- Green and Brown - Additional components that need to be removed/installed or disassembled/assembled prior to the target component.
- Yellow - Component that is touched or affected in a way but remains in the vehicle. It may be detached, attached, moved, modified, checked, adjusted etc.
- Magenta - Electrical connectors and fasteners such as nuts, bolts, clamps and clips.
- Pale Blue - Special tool(s) and general equipment.

One illustration may have multiple steps assigned to it.

Numbered pointers are used to indicate the number of electrical connectors and fasteners such as nuts, bolts, clamps and clips.

Items in the illustration can be transparent or use cutouts to show hidden details.














TAS Symbols

Symbols are used inside the graphics and in the text area to enhance the information display.

Uni-Body, Subframe and Mounting System - Front Subframe Front Bushing

Removal and Installation

Special Tool(s)







204-598 Hydraulic Cylinder 10t







204-598-01 Remover/Installer, Subframe Bushing Guide


Removal

1. WARNING: Make sure to support the vehicle with axle stands.

Raise and support the vehicle.

2. Remove the front subframe assembly.

Refer to: Front Subframe. Front Subframe







3. CAUTION: Mark the components to aid installation.

- Remove the bushing.

Special Tool(s): 204-598, 204-598-01

- Special tool 204-598-01/8 is used to start the bushing removal process, and must be removed after the bushing has released, as it will not pass through the sub-frame bushing aperture.

Installation







1. CAUTION: Make sure that the component aligns with the installation mark.

Install the bushing.

Special Tool(s): 204-598, 204-598-01

2. Install the front subframe.

Refer to: Front Subframe.

Refer to: Front Subframe. Front Subframe