Data List

DATA LIST

HINT: According to the DATA LIST displayed by the hand-held tester, you can read the value of components such as the switch, sensor, and actuator without parts removal. Reading the DATA LIST as the first step of troubleshooting is one method to shorten work time.

MTR (Combination Meter):

a. Warm up the engine.
b. Turn the ignition switch to the OFF position.
c. Connect the hand-held tester to DLC3.
d. Turn the ignition switch to the ON position.
e. Operate the hand-held tester according to the steps on the display and select "DATA LIST".