Illuminated Entry System Operation Check

ILLUMINATED ENTRY SYSTEM OPERATION CHECK

a. Illuminated entry system controls the following lamps:
- Key cylinder lamp
- Scuff plate illumination
- Room lamp assy No.1 and room lamp assy No.2

b. Check that the lamps come on when unlocking any of the doors, that are closed and locked with the ignition switch off. Then check that the lamps fade out under the following the conditions:
1. Leave the doors unlocked for 15 seconds.
2. Turn the ignition switch to the ACC or ON position.
3. Lock all the doors.

c. Check that the lamps stay ON for at least 15 seconds after opening any of the doors before fading out as shown in (b). Then check that the lamps fade out in 15 seconds after closing all the doors.

d. Check that the lamps stay lit after turning the ignition switch off with all the doors closed and the ignition switch in the ACC or ON position. Then check that the lamps fade out under the following the conditions:
1. Leave the doors unlocked for 15 seconds.
2. Turn the ignition switch to the ACC or ON position.
3. Lock all the doors.

e. Check that the lamps stay ON for at least 15 seconds after opening any of the doors before going (before about 15 seconds pass) under the conditions as shown in (d). Then check that the lamps fade out in 15 seconds after closing all the doors.

f. Check that the lamps come on when opening any of the doors and fade out when closing and locking all the doors or turning the ignition switch to the ACC or ON position.