Transmission Position Sensor/Switch: Service and Repair

PARK/NEUTRAL POSITION SWITCH ASSY (ATM)
REPLACEMENT
1. REMOVE BATTERY
2. REMOVE AIR CLEANER ASSY
3. REMOVE AIR CLEANER HOSE NO.1
4. REMOVE AIR CLEANER INLET NO.2
5. REMOVE AIR CLEANER BRACKET
6. REMOVE AIR CLEANER INLET NO.1
7. REMOVE INTAKE AIR RESONATOR SUB-ASSY
8. DISCONNECT TRANSMISSION CONTROL CABLE ASSY





a. Remove the nut from the control shaft lever
b. Disconnect the control cable from the control shaft lever





c. Remove the clip and disconnect the control cable from the control cable bracket.

NOTICE: Do not hold the resin guide pipe.

9. REMOVE PARK/NEUTRAL POSITION SWITCH ASSY





a. Disconnect the park/neutral position switch connector.
b. Remove the nut, washer and control shaft lever.





c. Pry out the lock plate.





d. Remove the lock nut and lock.





e. Remove the 2 bolts and pull out the park/neutral position switch.
10. INSTALL PARK/NEUTRAL POSITION SWITCH ASSY





a. Install the park/neutral position switch to the manual valve shaft.
b. Temporarily install the 2 bolts.





c. Place the lock plate and tighten the nut.
Torque: 6.9 Nm (70 kgf-cm, 61 inch lbs.)
d. Temporarily install the control shaft lever.





e. Turn the lever counterclockwise until it stops, then turn it clockwise 2 notches.
f. Remove the control shaft lever.





g. Align the groove with the neutral basic line.
h. Hold the switch in position and tighten the 2 bolts.
Torque: 5.4 Nm (55 kgf-cm, 48 inch lbs.)





i. Using a screwdriver, stake the nut with the lock plate.





j. Install the control shaft lever, washer and nut.
Torque: 13 Nm (130 kgf-cm, 9 ft. lbs.)
k. Connect the park/neutral position switch connector.
11. INSTALL TRANSMISSION CONTROL CABLE ASSY





a. Install the control cable and clip to the bracket.





b. Temporarily install the control cable to the control shaft lever with the nut.
12. ADJUST SHIFT LEVER POSITION
13. INSPECT SHIFT LEVER POSITION
14. INSPECT PARK/NEUTRAL POSITION SWITCH ASSY
15. INSTALL INTAKE AIR RESONATOR SUB-ASSY
16. INSTALL AIR CLEANER INLET NO.1
17. INSTALL AIR CLEANER BRACKET
18. INSTALL AIR CLEANER INLET NO.2
19. INSTALL AIR CLEANER HOSE NO.1
20. INSTALL AIR CLEANER ASSY
21. INSTALL BATTERY