Transmission Speed Sensor: Service and Repair
SPEED SENSORREPLACEMENT
1. REMOVE BATTERY
2. REMOVE AIR CLEANER ASSY
3. REMOVE AIR CLEANER HOSE NO.1
4. REMOVE AIR CLEANER INLET NO.2
5. REMOVE AIR CLEANER BRACKET
6. REMOVE AIR CLEANER INLET NO.1
7. REMOVE SPEED SENSOR (NT SENSOR)
a. Disconnect the speed sensor connector.
b. Remove the bolt and speed sensor.
8. REMOVE SPEED SENSOR (NC SENSOR)
a. Disconnect the speed sensor connector.
b. Remove the bolt and speed sensor.
9. INSTALL SPEED SENSOR (NC SENSOR)
a. Coat the O-ring with ATF.
b. Install the speed sensor with the bolt.
Torque: 11 Nm (115 kgf-cm, 8 ft. lbs.)
HINT: Make sure of the sensor manufacturer's name.
c. Connect the speed sensor connector.
10. INSTALL SPEED SENSOR (NT SENSOR)
a. Coat the O-ring with ATF.
b. Install the speed sensor with the bolt.
Torque: 11 Nm (115 kgf-cm, 8 ft. lbs.)
HINT: Make sure of the sensor manufacturer's name.
c. Connect the speed sensor connector.
11. INSTALL AIR CLEANER INLET NO.1
12. INSTALL AIR CLEANER BRACKET
13. INSTALL AIR CLEANER INLET NO.2
14. INSTALL AIR CLEANER HOSE NO.1
15. INSTALL AIR CLEANER ASSY
16. INSTALL BATTERY