Accessory Control Display: Service and Repair

Audio And Visual System:

MULTI-DISPLAY CONTROLLER SUB-ASSEMBLY

REPLACEMENT
1. REMOVE DECK BOARD SUB-ASSEMBLY
2. REMOVE TONNEAU COVER ASSEMBLY
3. REMOVE DECK FLOOR BOX FRONT
4. REMOVE DECK FLOOR BOX REAR
5. REMOVE DECK BOARD SUB-ASSEMBLY NO.2
6. REMOVE DECK BOARD SUB-ASSEMBLY NO.3
7. REMOVE BACK DOOR WEATHERSTRIP
8. REMOVE DECK SIDE TRIM BOX RH
9. REMOVE REAR FLOOR FINISH PLATE
10. REMOVE REAR FLOOR FINISH SIDE PLATE RH
11. SEPARATE DECK TRIM SIDE PANEL ASSEMBLY RH

HINT: Turn up the deck trim side panel assembly RH until the multi-display controller w/ bracket can be removed.

12. REMOVE TELEVISION CAMERA ECU (W/ EMV & NAVIGATION SYSTEM)




13. REMOVE MULTI-DISPLAY CONTROLLER W/BRACKET
a. Disconnect the connector.
b. Remove the 3 nuts and the multi-display controller w/ bracket.




14. REMOVE MULTI-DISPLAY CONTROLLER BRACKET A
a. Remove the 2 screws and the multi-display controller bracket A.




15. REMOVE MULTI-DISPLAY CONTROLLER BRACKET B
a. Remove the 2 screws and the multi-display controller bracket B.

16. REMOVE MULTI-DISPLAY CONTROLLER SUB-ASSEMBLY