License Plate Lamp: Service and Repair

Back Door - Part 1:

LICENSE PLATE LAMP ASSEMBLY

OVERHAUL

HINT:
1. REMOVE BACK DOOR TRIM PANEL ASSEMBLY UPPER
2. REMOVE BACK DOOR TRIM PANEL ASSEMBLY
3. REMOVE BACK DOOR GARNISH OUTSIDE




4. REMOVE LICENSE PLATE LAMP ASSEMBLY
a. Release the 2 claw fittings and disconnect the license plate lamp assembly as shown in the illustration.
b. Disconnect the connector and remove the license plate lamp assembly.

5. REMOVE LICENSE PLATE LAMP BULB
a. Remove the license plate lamp bulb, the license plate lamp socket and wire.
b. Remove the license plate lamp bulb from the license plate lamp socket and wire.

6. REMOVE LICENSE PLATE LAMP SOCKET AND WIRE
7. REMOVE LICENSE PLATE LAMP LENS