ABS (Antilock Brake System)

DIAGNOSTIC TROUBLE CODE CHART

NOTE: When removing parts, turn the ignition switch OFF.

HINT:
- Using SST 09843-18040, connect terminals TC and CG of the DLC3.
- If any abnormality is not found when inspecting parts, inspect the ECU and ground points for poor contact.
- If a trouble code is displayed during the DTC check, check the circuit listed for that code.
- When 2 or more DTCs are recorded and the problem is not identified, perform circuit inspection of the other DTCs.

C0200/31-C1238/38:

C1239/39-C1268/68:

DTC Chart of ABS

HINT:
- *1: As the DTC cannot be erased by replacing parts alone, do either of the following operations.
1. Clear the DTC.
2. At a speed of 20 km/h (12 MPH), drive the vehicle for 30 seconds or more.
- *2: Using the following table, troubled parts can be specified.

C1201/51:

C1203/53-U0100/65:

DTC Chart of VSC