Vanity Lamp: Service and Repair

VANITY LIGHT

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE VISOR ASSEMBLY
a. Using a screwdriver, remove the caps.

HINT: Tape the screwdriver tip before use.

b. Remove the 4 screws, and then disconnect the connectors.
c. Remove the 2 visors.

INSTALLATION

1. INSTALL VISOR ASSEMBLY
a. Install the 2 visors with the 4 screws and connect the connectors.
b. Install the 2 caps.

2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
3. PERFORM INITIALIZATION.
a. Perform initialization.

NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.