Installation

JF2A TRANSFER / 4WD / AWD: 4WD CONTROL ECU: INSTALLATION

1. INSTALL 4WD CONTROL ECU






(a) Install the ECU with the bolt.
Torque: 13 Nm (127 kgf-cm, 9 ft-lbf)
(b) Connect the 2 ECU connectors.
2. INSTALL LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL Installation

3. INSTALL INSTRUMENT PANEL BOX DOOR KNOB Installation

4. INSTALL FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY Installation

5. INSTALL COWL SIDE TRIM BOARD RH Installation

6. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Installation

7. INSTALL FRONT DOOR SCUFF PLATE RH Installation

8. INSTALL INNER NO. 1 INSTRUMENT PANEL BRACKET COVER RH Installation

9. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH Installation

10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.