Continuously Variable Transmission/Transaxle: Testing and Inspection

P310 HYBRID TRANSMISSION / TRANSAXLE: HYBRID TRANSAXLE SYSTEM:

ON-VEHICLE INSPECTION

1. INSPECT OIL PRESSURE IN OIL PUMP
NOTE: Do the test at normal operating oil temperature 50 to 80°C (122 to 176°F).

(a) Lift up the vehicle.






(b) Remove the fluid pump cover plug and install SST.
SST: 09992-00095
09992-00112
09992-00271
(c) Set the vehicle to 2WD inspection mode. Service Precautions

(d) Measure the oil pressure.
Oil pressure:
9.8 kPa (0.1 kgf/cm2, 1.4 psi) or more
NOTE: Be sure to cancel the inspection mode immediately after the oil pressure check is completed. Service Precautions





(e) Install a new O-ring and fluid pump cover plug.
Torque: 8.0 Nm (82 kgf-cm, 71 in-lbf)