Tire Pressure Warning System Initialization

How to initialize the tire pressure warning system

1. Park the vehicle in a safe place and turn the "ENGINE START STOP" switch to OFF.

While the vehicle is moving, initialization is not performed.

2. Adjust the tire pressure to the specified cold tire inflation pressure.

Make sure to adjust the tire pressure to the specified cold tire inflation pressurelevel. The tire pressure warning system will operate based on this pressure level.

3. Turn the "ENGINE START STOP" switch to IGNITION ON mode.
4. Push and hold the tire pressure warning reset switch until the tire pressure warning light blinks slowly 3 times and a message appears on the multi-information display.
5. Wait a few minutes with the IGNITION ON mode, and then turn the "ENGINE START STOP" switch to OFF.