Removal

3UR-FE ENGINE CONTROL: ENGINE COOLANT TEMPERATURE SENSOR: REMOVAL

REMOVAL

1. REMOVE ENGINE ROOM SIDE COVER LH Removal
2. REMOVE ENGINE ROOM SIDE COVER RH Removal
3. REMOVE UPPER RADIATOR SUPPORT SEAL Removal
4. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH Removal
5. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH Removal
6. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY Removal
7. DRAIN ENGINE COOLANT Service and Repair
8. REMOVE V-BANK COVER SUB-ASSEMBLY Removal





9. REMOVE ENGINE COOLANT TEMPERATURE SENSOR
(a) Disconnect the sensor connector.
(b) Using a 19 mm deep socket wrench, remove the sensor.
(c) Remove the gasket from the sensor.