All Power Window Up Functions Do Not Operate With Entry Lock Switch

WINDOW / GLASS: POWER WINDOW CONTROL SYSTEM: All Power Window Up Functions do not Operate with Entry Lock Switch
- All Power Window Up Functions do not Operate with Entry Lock Switch

DESCRIPTION

When an entry lock switch is pressed and held for approximately 3 seconds: 1) the main body ECU transmits a signal to all the power window regulator motors, and 2) all the power window motors are activated to close the windows.

INSPECTION PROCEDURE

PROCEDURE

1. CHECK BASIC FUNCTION (SMART ACCESS SYSTEM WITH PUSH BUTTON START (for Entry Function))

(a) Check that the entry lock switch operates Operation Check.

OK:

Entry lock switch can lock all doors.

NG -- GO TO SMART ACCESS SYSTEM WITH PUSH-BUTTON START (for Entry Function) Problem Symptoms Table

OK -- REPLACE MAIN BODY ECU (COWL SIDE JUNCTION BLOCK LH)