C1879

SUSPENSION CONTROL: KINETIC DYNAMIC SUSPENSION SYSTEM: C1879/79: Zero Point Calibration of Acceleration Sensor Undone
C1879/79 - Zero Point Calibration of Acceleration Sensor Undone

DESCRIPTION

The stabilizer control ECU receives the yaw rate and acceleration sensor zero point information from the skid control ECU via CAN communication.





INSPECTION PROCEDURE

HINT
When this DTC is output, obtain the calibration value of the yaw rate and acceleration sensor zero point first.

PROCEDURE

1. PERFORM ZERO POINT CALIBRATION

(a) Perform brake control system calibration Programming and Relearning.

NEXT -- Continue to next step.

2. RECONFIRM DTC

(a) Clear the DTCs Kinetic Dynamic Suspension System.

(b) Check for DTCs Kinetic Dynamic Suspension System.

Result





B -- END

A -- REPLACE STABILIZER CONTROL ECU Removal