Body - General Maintenance

MAINTENANCE: BODY: GENERAL MAINTENANCE

1. BODY INSPECTION

(a) Check the body exterior for dents, scratches and rust.

(b) Check the underbody for rust and damage.

2. REPLACE AIR CONDITIONING FILTER

(a) Remove the air conditioning filter Disassembly.

(b) Visually inspect the surface of the air conditioning filter. If the air conditioning filter is contaminated with foreign matter, replace it.

3. ROAD TEST

(a) Check the engine and chassis for abnormal noises.

(b) Check that the brakes work properly and do not drag.

(c) Set the parking brake shoes and drums.

4. TIGHTEN BOLTS AND NUTS ON CHASSIS AND BODY

(a) Tighten the bolts and nuts on the chassis parts listed below if necessary.

Front axle and suspension

Drivetrain

Rear axle and suspension

Brake system

Engine mounting

Other chassis parts

(b) Tighten the bolts and nuts on the body parts listed below if necessary.

Seat belt system

Seats

Doors and hood

Body mountings

Fuel tank

Exhaust pipe system

Other body parts

5. FINAL INSPECTION

(a) Check the operation of these vehicle body parts.

(1) Hood

Auxiliary catch operates properly.

Hood locks securely when closed.

(2) Front and rear doors

Door locks operate properly.

Doors close properly.

(3) Back door

Door lock operates properly.

(4) Seats

Seat adjusts easily and locks securely in any position.

Seatback of each seat locks securely in any position.

3rd seat locks safely when stored.

(5) Be sure that the vehicle is clean before returning it to the customer. In particular, pay attention to the following:

Steering wheel

Parking brake lever

Shift lever knob

All switch knobs

Door handles

Seats