Rear View Monitor System (w/o Side Monitor System)

PARK ASSIST / MONITORING: REAR VIEW MONITOR SYSTEM (w/o Side Monitor System): Reverse Signal Circuit
- Reverse Signal Circuit

DESCRIPTION

The inner rear view mirror assembly receives a reverse shift position signal from the park/neutral position switch assembly.

WIRING DIAGRAM

INSPECTION PROCEDURE

PROCEDURE

1. INSPECT INNER REAR VIEW MIRROR ASSEMBLY

(a) Disconnect the T5 connector from the inner rear view mirror assembly.

(b) Measure the voltage according to the value(s) in the table below.

Standard Voltage:

Text in Illustration

NG -- CHECK HARNESS AND CONNECTOR (INNER REAR VIEW MIRROR - PARK/NEUTRAL POSITION SWITCH)

OK -- PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Problem Symptoms Table

2. CHECK HARNESS AND CONNECTOR (INNER REAR VIEW MIRROR - PARK/NEUTRAL POSITION SWITCH)

(a) Disconnect the T5 connector from the inner rear view mirror assembly.

(b) Disconnect the D8 connector from the park/neutral position switch assembly.

Text in Illustration

NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR (INNER REAR VIEW MIRROR - PARK/NEUTRAL POSITION SWITCH)
OK -- Continue to next step.

3. INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY

(a) Disconnect the D8 connector from the park/neutral position switch assembly.

(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Text in Illustration

Result:

C -- REPLACE PARK/NEUTRAL POSITION SWITCH ASSEMBLY (U660E)

B -- REPLACE PARK/NEUTRAL POSITION SWITCH ASSEMBLY (U660F) Removal

A -- REPAIR OR REPLACE HARNESS OR CONNECTOR (PARK/NEUTRAL POSITION SWITCH ASSEMBLY - BATTERY)