Removal

2GR-FE ENGINE CONTROL: CAMSHAFT OIL CONTROL VALVE: REMOVAL

1. PRECAUTION (w/ Navigation System for HDD)

NOTICE:
After the engine switch is turned off, the display and navigation module display (HDD navigation system) records various types of memory and settings. As a result, after turning the engine switch off, make sure to wait at least 60 seconds before disconnecting the cable from the negative (-) battery terminal.

2. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY

(a) Remove the windshield wiper motor and link assembly Removal.

3. REMOVE NO. 1 ENGINE UNDER COVER

4. DRAIN ENGINE COOLANT Service and Repair

5. REMOVE OUTER COWL TOP PANEL SUB-ASSEMBLY Removal

6. REMOVE V-BANK COVER SUB-ASSEMBLY Removal

7. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system Service Precautions.

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

8. REMOVE BATTERY Removal

9. REMOVE NO. 2 AIR CLEANER INLET Removal

10. REMOVE NO. 1 AIR CLEANER INLET Removal

11. REMOVE AIR CLEANER ASSEMBLY Removal

12. REMOVE INTAKE AIR SURGE TANK ASSEMBLY Removal

13. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY

(a) Remove the bolt and disconnect the wire harness clamp to separate the engine wire.





(b) Disconnect the 4 oil control valve connectors.

(c) Remove the 4 bolts and 4 oil control valves.





(d) Remove the O-ring from each oil control valve.





Text in Illustration