Removal

2GR-FE ENGINE CONTROL: CAMSHAFT POSITION SENSOR: REMOVAL

1. PRECAUTION (w/ Navigation System for HDD)

NOTICE:
After the engine switch is turned off, the display and navigation module display (HDD navigation system) records various types of memory and settings. As a result, after turning the engine switch off, make sure to wait at least 60 seconds before disconnecting the cable from the negative (-) battery terminal.

2. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY

(a) Remove the windshield wiper motor and link assembly Removal.

3. REMOVE OUTER COWL TOP PANEL SUB-ASSEMBLY Removal

4. REMOVE V-BANK COVER SUB-ASSEMBLY Removal

5. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system Service Precautions.

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

6. REMOVE NO. 2 AIR CLEANER INLET Removal

7. REMOVE NO. 1 AIR CLEANER INLET Removal

8. REMOVE BATTERY Removal

9. REMOVE NO. 1 ENGINE UNDER COVER

10. DRAIN ENGINE COOLANT Service and Repair

11. REMOVE AIR CLEANER ASSEMBLY Removal

12. REMOVE INTAKE AIR SURGE TANK ASSEMBLY Removal

13. REMOVE VVT SENSOR

(a) Disconnect the 4 sensor connectors.

(b) Remove the 4 bolts and 4 sensors.