Integration Relay
POWER DISTRIBUTION: INTEGRATION RELAY: INSPECTION
1. INSPECT INTEGRATION RELAY
(a) Inner circuit (for Halogen Headlight)
(1) for A/F relay
Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
If the result is not as specified, replace the integration relay.
(2) for S-HORN relay
Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
If the result is not as specified, replace the integration relay.
(3) for HORN relay
Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
If the result is not as specified, replace the integration relay.
(4) for HEAD (RL) relay
Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
If the result is not as specified, replace the integration relay.
(5) for HEAD (LL) relay
Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
If the result is not as specified, replace the integration relay.
(6) for DRL relay
Measure the voltage and check for pulses according to the value(s) in the table below.
Standard Voltage:
Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
If the result is not as specified, replace the integration relay.
(b) Inner circuit (w/ Automatic Type Headlight Beam Level Control)
(1) for A/F relay
Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
If the result is not as specified, replace the integration relay.
(2) for Bi-XENON relay
Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
If the result is not as specified, replace the integration relay.
(3) for S-HORN relay
Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
If the result is not as specified, replace the integration relay.
(4) for HORN relay
Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
If the result is not as specified, replace the integration relay.
(5) for HEAD (RL) relay
Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
If the result is not as specified, replace the integration relay.
(6) for HEAD (LL) relay
Measure the resistance and check for pulses according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
If the result is not as specified, replace the integration relay.
(7) for DRL relay
Measure the voltage according to the value(s) in the table below.
Standard Voltage:
Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
If the result is not as specified, replace the integration relay.