Manual Shifting Test

MANUAL SHIFTING TEST
HINT: With this test, it can be determined whether the trouble lies within the electrical circuit or is a mechanical problem in the transaxle.




1. Disconnect solenoid wire.




2. Inspect manual driving operation.
Check that the shift and gear positions correspond with the table.

HINT: If the L, 2 and D range gear positions are difficult to distinguish, perform the following road test.

- While driving, shift through the L, 2 and D ranges. Check that the gear change corresponds to the shift position.

If any abnormality is found in the above test, the problem lies in the transaxle itself.

3. Connect solenoid wire.

4. Cancel out diagnostic trouble code.




REFERENCE: Possible gear positions in accordance with solenoid operating conditions.