Installation

PROCEDURE





1. Install connector.
- Install the gasket. connector and connector support with the 2 screws.
2. Install fuel pump filter to fuel pump.
- Install the pump filter with a new clip.





3. Install fuel sender gauge to fuel pump bracket.
- Install the sender gauge with the 2 screws.
- Connect the fuel sender gauge connector.





4. Install fuel pump to fuel pump bracket.
- Install the rubber cushion to the fuel pump.
- Connect the fuel hose to the outlet port of the fuel pump.
- Install the fuel pump by pushing the lower side of the fuel pump.
- Install the fuel pump connector.