Air Flow Meter/Sensor: Service and Repair

REMOVAL




1. Disconnect negative (-) terminal cable from battery.

CAUTION: Work must be started after 90 seconds from the time the ignition switch is turned to the LOCK position and the negative (-) terminal cable is disconnected from the battery.





2. Remove air cleaner hose.
- Disconnect the Positive Crankcase Ventilation (PCV) hose.
- Loosen the 2 hose clamps and remove the air cleaner hose.





3. Remove the Mass Air Flow (MAF) Meter.
- Disconnect the MAF Meter connector.
- Remove the 2 bolts and MAF Meter.

INSTALLATION

1. Install MAF Meter
- Insert the MAF Meter end into the air cleaner case.
- Secure the MAF Meter with the 2 bolts.

Torque: 6.9 Nm (61 in lb)

- Connect the MAF Meter connector.
2. Install Air Cleaner Hose
- Install the air cleaner hose with the 2 hose clamps.
- Connect the PCV hose.