Gasket Material Tips

When working with Formed In Place Gasket (FIPG) material, you must observe the following precautions:
^ Using a razor blade and gasket scraper, remove all old FIPG material from the gasket surfaces.
^ Thoroughly clean all components to remove all loose material.
^ Clean both sealing surfaces with non-residue solvent.
^ Apply FIPG in an approx. 1 mm (0.040 in) wide bead along the sealing surface.
^ Parts must be assembled within 10 minutes of application. Otherwise the FIPG material must be removed and reapplied.

NOTE: If the vehicle is equipped with a mobile communication system, refer to Electrical Precautions.