Fuel Pressure Regulator Removal

1. DISCONNECT DLC1 FROM BRACKET.





2. DISCONNECT VACUUM SENSING HOSE FROM FUEL PRESSURE REGULATOR.
3. DISCONNECT FUEL RETURN PIPE FROM FUEL PRESSURE REGULATOR.
- Remove the union bolt and 2 gaskets, and disconnect the return pipe from the pressure regulator.

CAUTION:
- Put a shop rag under the pressure regulator.
- Slowly loosen the union bolt.





4. REMOVE FUEL PRESSURE REGULATOR.
- Remove the 2 bolts, and pull out the pressure regulator.
- Remove the 0-ring from the pressure regulator.