Vacuum Reservoir: Service and Repair

VACUUM TANK REMOVAL
1. A/T:





REMOVE OIL DIPSTICK AND GUIDE FOR A/T.
- Remove the bolt.
- Pull out the dipstick guide together with the dipstick.





- Remove the 0-ring from the dipstick guide

INSTALLATION HINT: Use a new 0-ring.





2. REMOVE VACUUM TANK AND VSV ASSEMBLY.
- Remove the 2 nuts, and disconnect the vacuum tank from the intake manifold.

Torque: 21 N.m (210 kgf.cm. 15 ft.lb.)





- Disconnect these connector and hoses, and remove the vacuum tank and VSV assembly:
(1) VSV connector
(2) Vacuum hose (from air intake chamber) from port B of vacuum tank
(3) Vacuum hose (from actuator) from VSV





3. REMOVE VSV FROM VACUUM TANK.
- Disconnect the vacuum hose from port A of the vacuum tank.
- Remove the screw and VSV.



VACUUM TANK INSTALLATION

INSTALLATION HINT: Installation is in the reverse order of removal.