Glass Printed Antenna

NOTE:
The glass printed antenna is repaired in the same manner as the rear window defogger.

DEFOGGER WIRE REPAIR





a. Clean the broken wire tips with a grease, wax and silicone remover.
b. Place the masking tape along both sides of the wire to be repaired.
c. Thoroughly mix the repair agent (Dupont paste No. 4817).





d. Using a fine tip brush, apply a small amount to the wire.
e. After a few minutes. remove the masking tape.
f. Do not operate the defogger wire for at least 24 hours after repairing.