Headlamp: Adjustments

Adjusting headlight aim only




1. INSPECT HEADLIGHT AIM
Do the following items before inspection.
- Make sure the body around the headlight is not deformed.
- Park the vehicle on a level spot.
- The driver gets into the driver's seat and puts the vehicle in a state ready for driving (with a full tank).
- Bounce the vehicle several times.




2. ADJUST HEADLIGHT AIM
Vertical Alignment:
If the bubble is outside the acceptable range of the beam angle gauge, adjust it using bolt A.
Horizontal Alignment:
If the O- moves away from the mark beyond the acceptable range, adjust the O back to the mark using bolt B.