Headlamp: Service and Repair
Replacing headlight1. REPLACE HEADLIGHT
2. INSPECT HEADLIGHT AIM
Do the following items before inspection.
- Make sure the body around the headlight is not deformed.
- Park the vehicle on a level spot.
- The driver gets into the driver's seat and puts the vehicle in a state ready for driving (with a full tank).
- Bounce the vehicle several times.
3. ADJUST HEADLIGHT AIM
Vertical Alignment:
a. Using adjustment bolt A, adjust the headlight aim to within the specifications.
b. Make sure the gauge bubble is within the acceptable range.
HINT: If the gauge bubble is outside the acceptable range, check that the vehicle is parked on a level spot. Readjust the headlight aim after parking the vehicle on a level spot.
c. Horizontal Alignment:
Using adjustment bolt B, adjust the headlight aim to within the specifications.
d. Using adjustment bolt C, adjust the 0 back to the mark.