Combination Switch: Testing and Inspection

COMBINATION SWITCH INSPECTION








1. INSPECT LIGHT CONTROL SWITCH CONTINUITY
If continuity is not as specified. replace the switch.





2. INSPECT FOG LIGHT SWITCH CONTINUITY
If continuity is not as specified, replace the switch.








3. INSPECT DIMMER SWITCH CONTINUITY
If continuity is not as specified. replace the switch.





4. INSPECT TURN SIGNAL SWITCH CONTINUITY
If continuity is not as specified. replace the switch.





5. INSPECT COMBINATION SWITCH CIRCUIT
Connect the wire harness side connector to the combination switch and inspect wire harness side connector from the back side, as shown on next page.
There is resistance because this circuit is grounded through the bulb.
If the circuit is not as specified. inspect the circuit connected to other parts.





Light Control Switch Circuit:





Fog Light Switch Circuit:





Headlight Dimmer Switch Circuit:





Turn Signal Switch Circuit: