Front

WHEEL HUB BOLT REPLACEMENT
1. Remove the front wheel.
2. Remove the brake caliper and disc.





3. Using the 09628 - 10011 SST, remove the hub bolt.
4. Install the hub bolt, following these steps.





a. Install a washer and nut to the bolt, as shown in the illustration.
b. Turn the wheel nut to pull the hub bolt until the underside of the hub bolt head touches the axle hub.

5. Install the disc and brake caliper, tightening the caliper bolts to 118 Nm (87 ft. lbs.).
6. Install the front wheel, tightening it down to 103 Nm (76 ft. lbs.).