Idle Speed: Testing and Inspection

1. INITIAL CONDITIONS
- Engine at normal operating temperature
- Air cleaner installed
- All pipes and hoses of air induction system connected
- All accessories switched OFF
- All vacuum hoses (for EGR system, etc.) should be properly connected.
- SFI system wiring connectors fully plugged
- Ignition timing set correctly
- Transmission in neutral position

2. CONNECT LEXUS HAND-HELD TESTER OR OBDII SCAN TOOL
3. INSPECT IDLE SPEED
- Race the engine speed at 2,500 rpm for approx. 90 seconds.
- Check the idle speed.

Idle speed: 700 ± 50 rpm

- If the idle speed is not as specified. check the IAC valve.

4. DISCONNECT LEXUS HAND-HELD TESTER OR OBDII SCAN TOOL