Speed Sensor, Rear

Rear Speed Sensor Components:

REMOVAL
1. Disconnect Speed Sensor connector.
(a) Remove the front trim of the luggage compartment.

Rear Speed Sensor Connector:

(b) Disconnect the Speed Sensor connector, and pull out the sensor wire harness with the grommet.
2. Remove Speed Sensor.
(a) Remove the 2 clamp nuts holding the sensor wire harness to the body and upper arm.
Torque: 5.0 Nm (51 kg.cm, 44 inch lbs.)

Remove The Rear Speed Sensor From The Axle Carrier:

(b) Remove the Speed Sensor from the Axle Carrier.
Torque: 7.8 Nm (80 kg.cm, 69 inch lbs.)

INSTALLATION
Installation is in the reverse order of removal.
After installation, check Speed Sensor signal.