Level Control Solenoid Valve: Service and Repair

REPLACEMENT
1. Remove front right wheel.

Installation Hint: Torque to 103 Nm (76 ft. lbs.)

2. Remove front right fender liner rear.
3. Remove luggage compartment trim front cover.
4. Remove height control valve installation

Installation Hint: After installation, check for air leakage.

a. Remove the connector.
b. Remove the air tube.
(1) Remove the holder.
(2) Spread the clip and pull the air tube out straight and slowly.

NOTICE: Do not get scratches or foreign particles on the O-ring, O-ring seal and flare section.

Installation Hint: If replacing O-ring, coat it with MP grease. Push the air tube in straight to correct it until the clip makes "click" sound.

(3) Remove the clip.
c. Remove the 2 nuts and the height control valve.

Installation Hint: Torque to 5.4 Nm (48 inch lbs.)

5. Remove bushing, cushion and spacer.
6. Installation is in the reverse order of removal.